Wedge
Type Anchors —
SPECIFIED FOR ANCHORAGE INTO CONCRETE
Wedge anchors feature stainless steel split expansion
ring and a threaded stud bolt body and integral cone expander, nut and
washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized
carbon steel, type 304 stainless steel or type 316 stainless steel as
identified in the drawings or other notations.
The exposed end of the anchor is stamped to identify
anchor length. Stampings should be preserved during installation for
any subsequent embedment verification.
Use carbide tipped hammer drill bits made in accordance
to ANSI B212.15-1994 to install anchors.
Anchors tested to ASTM E488 criteria and listed
by ICC (formerly ICBO). Anchors are listed by the following agencies
as required by the local building code: UL, FM, City of Los Angeles,
California State Fire Marshal and Caltrans. |
.jpg)