Trubolt Wedge Type Anchor Performance Data (2 pages) Product Information : Suggested Specifications Selection and Order Information (2 pages) Installation Instructions :Approvals and Listing INSTALLATION STEPS 1.  Select a carbide drill bit with a diameter equal to the anchor diameter. Drill hole to any depth excceeding the desired embedment. See chart for minimum recommended embedment.   2.  Clean hole or continue drilling additional depth to accommodate drill fines.   3. Assemble washer and nut, leaving nut flush with end of anchor to protect threads. Drive anchor through material to be fastened until washer is flush to surface of material.   4. Expand anchor by tightening nut 3-5 turns past the hand tight position, or to the specified torque requirement.   APPLICATIONS Anchoring machinery and conveyors is a common wedge anchor application. The Trubolt is fully threaded to allow a large range of embedment and fixture thickness.   Safety railings are commonly anchored with Trubolt wedge anchors because of availability in four material types for all corrosive atmospheres.   Seismic Wedge Anchor cracked concrete approval controls tension & shear simultaneously.   FEATURES (A) Length ID Head Stamp—provides for embedment inspection after installation (B) Fully Threaded Design Cold-Formed—manufacturing process adds strength (C) Stainless steel split expansion ring Anchor Body—available in zinc-plated steel, hot-dipped galvanized steel, 304 stainless steel and 316 stainless steel     APPROVALS / LISTINGS ICC Evaluation Service, Inc. – #ESR-2251 - Category 1 performance rating - 2006 IBC compliant - Meets ACI 318 ductility requirements - Tested in accordance with ACI 355.2 and ICC-ES AC193 - Listed for use in seismic zones A & B - 1/4", 3/8" & 1/2" diameter anchors listed in ESR-2251 Underwriters Laboratories Factory Mutual City of Los Angeles – #RR2748 California State Fire Marshal Caltrans Meets or exceeds U.S. Government G.S.A. Specification A-A-1923A Type 4 (Formerly GSA: FF-S-325 Group II, Type 4, Class 1) ICC Evaluation Service, Inc. – #ESR-2427 - Category 1 performance rating - 2006 IBC and 2009 IBC compliant - Meets ACI ductility requirements - Tested in accordance with ACI 355.2 and ICC-ES AC193 - Listed for use in seismic zones A, B, C, D, E, & F - 3/8", 1/2", 5/8" & 3/4" diameter anchors listed in ESR-2427 LENGTH INDICATION CODE CODE LENGTH OF ANCHOR CODE LENGTH OF ANCHOR A 1-1/2 < 2 (38.1 < 50.8) K 6-1/2 < 7 (165.1 < 177.8) B 2 < 2-1/2 (50.8 < 63.5) L 7 < 7-1/2 (177.8 < 190.5) C 2-1/2 < 3 (63.5 < 76.2) M 7-1/2 < 8 (190.5 < 203.2) D 3 < 3-1/2 (76.2 < 88.9) N 8 < 8-1/2 (203.3 < 215.9) E 3-1/2 < 4 (88.9 < 101.6) O 8-1/2 < 9 (215.9 < 228.6) F 4 < 4-1/2 (101.6 < 114.3) P 9 < 9-1/2 (228.6 < 241.3) G 4-1/2 < 5 (114.3 < 127.0) Q 9-1/2 < 10 (241.3 < 254.0) H 5 < 5-1/2 (127.0 < 139.7) R 10 < 11 (254.0 < 279.4) I 5-1/2 < 6 (139.7 < 152.4) S 11 < 12 (279.4 <304.8) J 6 < 6-1/2 (152.4 < 165.1) T 12 < 13 (304.8 < 330.2) Trubolt Wedge Type Anchor Performance Data (2 pages) Product Information : Suggested Specifications Selection and Order Information (2 pages) Installation Instructions :Approvals and Listing