Light-Duty
Hammer-Drive Masonry Anchors —
SPECIFIED FOR ANCHORAGE INTO CONCRETE, BLOCK AND BRICK
The Redi-Drive is a high performance small diameter
one-piece hammer-drive anchor. The anchor holds based on a friction
principle—the shank diameter is larger than the drill hole size.
Anchors should be installed with carbide tipped hammer drill bits
made in accordance to ANSI B212.15-1994
The Redi-Drive is available in four types...
mushroom head, pipe-hanging (1/4" & 3/8"), Tie- Wire,
and double head forming versions. Anchor performance in solid concrete
at one inch embedment shall exceed 400 lbs. allowable tension load
and 750 lbs. allowable shear load.
|
