header

or go to the Advance Search
QuickMenu Save Document


Redi-Drive Masonry Anchor
Selection and Order Information
Product Information : Suggested Specifications : Installation Instructions
Performance Data : Approvals and Listing
SELECTION CHART

Redi-Drive
Anchors

 
redidrive08.gif (12780 bytes)Typical Applications
Electrical Boxes,
conduit clips,
and duct work

 		 PART
NUMBER		 HEAD DIA.
In. (mm)		 DRILL BIT
SIZE
In. (mm) 		TOTAL
LENGTH
In. (mm) 		MIN.
EMBEDMENT
In. (mm) 		MAX.
FIXTURE
THICKNESS
In. (mm)		 CLEARANCE
HOLE SIZE.
In. (mm)		 QTY/WT
PER BOX
Lbs.		 QTY/WT
PER MASTER
CARTON
Lbs.
RD4-034 7/16 (11.1) 3/16 (4.8) 3/4 (19.1) 11/16 (17.5) 1/16 (1.6) 1/4 (6.4) 100/1.4 1000/15
RD4-118 7/16 (11.1) 3/16 (4.8) 1-1/8 (28.6) 3/4 (19.1) 3/8 (9.5) 1/4 (6.4) 100/1.6 1000/17
RD4-158 7/16 (11.1) 3/16 (4.8) 1-5/8 (41.3) 3/4 (19.1) 7/8 (22.2) 1/4 (6.4) 100/2.2 1000/23
RD4-200 7/16 (11.1) 3/16 (4.8) 2 (50.8) 3/4 (19.1) 1-1/4 (31.8) 1/4 (6.4) 100/2.6 1000/26
RD4-212 7/16 (11.1) 3/16 (4.8) 2-1/2 (63.5) 3/4 (19.1) 1-3/4 (44.5) 1/4 (6.4) 100/3.2 1000/33
RD4-300 7/16 (11.1) 3/16 (4.8) 3 (76.2) 3/4 (19.1) 2-1/4 (57.2) 1/4 (6.4) 100/3.7 1000/37

SELECTION CHART

Redi-Drive
Anchors

redidrive13.gif (6876 bytes)
Tie Wire
Typical Applications—
Acoustical ceilings, suspended electrical fixture, pencil rod
 PART
NUMBER		 HEAD SIZE
O.D.
In. (mm)		 DRILL BIT SIZE
In. (mm) 		TOTAL
LENGTH
In. (mm) 		MIN.
EMBEDMENT
In. (mm) 		HEAD
HEIGHT
In. (mm)		 HEAD
SIZE
I.D.		 QTY/WT PER BOX
Lbs.		 QTY/WT
PER MASTER CARTON Lbs
TD4-112 3/16 (4.8) 3/16 (4.8) 2-1/8 (54.0) 1-1/4 (31.8) 5/8 (15.9) 9/32" HOLE 100/ 3.5 1000/ 35
redidrive14.gif (7237 bytes)
Pipe Hanging
Typical Apllications—
Fire sprinkler, water lines, steam/gas, cable tray, electrical conduit
 PART
NUMBER		 INTERNAL
THREAD
SIZE
I.D.		 DRILL
BIT SIZE
In. (mm) 		TOTAL LENGTH
In. (mm) 		MIN.
EMBEDMENT
In. (mm) 		HEAD
HEIGHT
In. (mm)

INTERNAL
THREAD
DIAMETER
O.D.
In. (mm)

 QTY/WT PER BOX
Lbs.		 QTY/WT
PER MASTER
CARTON
Lbs
PD4-112

1/4 - 20"

 3/16 (4.8) 2-1/8 (54.0) 1-1/4 (31.8) 5/8 (15.9) 13/32 (10.3) 100/ 3.0 1000/ 30
PD8-134

3/8 - 16"

 

 1/4 (6.4) 2-1/2 (63.5) 1-3/4 (44.5) 3/4 (19.1) 9/16 (14.3) 100/ 6.0 1000/ 61
redidrive15.gif (7339 bytes)
Forming—
Wood attachments to concrete are common Redi-drive applications, whether permanent or temporary
 PART
NUMBER		 HEAR
SIZE
O.D.
In. (mm)		 DRILL
BIT SIZE
In. (mm) 		TOTAL
LENGTH
In. (mm) 		MIN.
EMBEDMENT
In. (mm) 		HEAD
HEIGHT
In. (mm)		 HEAD
SIZE
I.D.		 QTY/WT
PER
BOX
Lbs.		 QTY/WT
PER MASTER
CARTON
Lbs.
FD6-234 7/16 (11.1) 3/16 (4.8) 2-3/4 (69.9)
1-1/4 (31.8)
N/A N/A 100/ 3.1 1000/ 31
FD8-234 7/16 (11.1) 1/4 (6.4) 2-3/4 (69.9)
1-1/4 (31.8)
N/A N/A 100/ 5.6 1000/ 56

ACCESSORIES

Redi-Drive
Setting Tool

Installs Redi-Drive anchors in tight and hard to access areas—easily and quickly. Just place anchor in rubber “holding cap,” place against work surface and hammer in anchors.
PART
NUMBER		 DESCRIPTION QTY/WT
PER BOX 		QTY/WT
PER MASTER CARTON
RDST Redi-Drive Setting Tool 1/1 1/1


Redi-Drive Masonry Anchor
Selection and Order Information
Product Information : Suggested Specifications : Installation Instructions
Performance Data : Approvals and Listing
ITW Red Head • 2171 Executive Drive • Addison, IL 60101 • 630-350-0370
copyright © 2010 Illinois Tool Works, Inc.