header

or go to the Advance Search
QuickMenu Save Document
E-Z Ancor

Product Information
Suggested/Ordering Information
Performance Data
Approval Listings

INSTALLATION INSTRUCTIONS

ez_selper1a.jpg (2269 bytes)

 1. Place #2 phillips screwdriver or cordless screwdriver (#2phillips bit) into recess of E-Z Ancor.
ez_selper1b.jpg (2042 bytes) 2. Press into Gypsum wallboard while turning the anchor clockwise until seated flush.
ez_selper1c.jpg (2630 bytes) 3. Place fixture in position over installed E-Z Ancor. Insert screw (#8A or AB screws are recommended). Tighten fixture into place.
 

 

 
ITW Red Head • 2171 Executive Drive • Addison, IL 60101 • 630-350-0370
copyright © 2010 Illinois Tool Works, Inc.