A7 Adhesive Anchoring System

 Acrylic Adhesive

1.	Two component methyl methacrylate adhesive, non-sag paste, moisture insensitive when cured, dark gray in color.
2.	Meets ASTM C881, Type IV, Grade 3, Class A, B, and C with the exception of gel time and epoxy content.
3.	Shrinkage during curing per ASTM D2566: .002in./In.
4.	Heat deflection temperature, ASTM D648: 140°F minimum.
5.	Shelf life: Best if used within 18 months.
6.	.Compressive strength, ASTM D695: 10,300 psi minimum
7.	Pumpable at 0°F without preheating

 Packaging

1.	Disposable, self-contained cartridge system capable of dispensing both components in the proper mixing ratio
2.	Acrylic components dispensed through a static mixing nozzle that thoroughly mixes the material and places the material at the base of the pre-drilled hole
3.	Cartridge markings: Include manufacturer's name, batch number and best-used-by date, mix ratio by volume, ANSI hazard classification, and appropriate ANSI handling precautions.