EPCON C6 Fast Curing Epoxy Product Information and Advantages Suggested Specifications Applications, Features and Installation Instructions Ordering Information and Estimating Tables 18 oz. Performance Data (3 pages) : Watch Training Video : Approval and Listings   C6–18 fl. oz. Ordering Information PART NUMBER DESCRIPTION BOX/BAG QTY CARTON QTY C6-18 C6 Adhesive,18 Fl. Oz. Cartridge 1 6 E24XL Mixing Nozzle for C6-18 Cartridge Nozzle diameter fits 9/16" holes (overall length of nozzle 10-3/8") 24 24 E102 Hand Dispenser for C6-18 Cartridges Dispenses both 18 oz. and 22 oz. Cartridges 1 1 RH7010 EPCON DRIVE Cordless, battery powered dispensing tool for the A7-28 Cartridge 1 1   E25-6 6-Foot Straight Tubing (.39 in I.D. x .43 in. O.D.) 1 6 E200 Pneumatic Dispenser for C6-18 Cartridge 1 1 Click here for information on brushes, hole plugs, and extension tubing for deep holes.

ESTIMATING TABLE

C6   18 Fluid Ounce Cartridge   Number of Anchoring Installations per Cartridge* Using Reinforcing Bar with C6 Adhesive in Solid Concrete REBAR DRILL HOLE DIA. INCHES EMBEDMENT DEPTH IN INCHES (mm) 1 (25.4) 2 (50.8) 3 (76.2) 4 (101.6) 5 (127.0) 6 (152.4) 7 (177.8) 8 (203.2) 9 (228.6) 10 (254.0) 11 (279.4) 12 (304.8) 13 (330.2) 14 (355.6) 15 (381.0) #3 1/2 316.7 158.4 105.6 79.2 63.3 52.8 45.2 39.6 35.2 31.7 28.8 26.4 24.4 22.6 21.1 #4 5/8 239.3 119.6 79.8 59.8 47.9 39.9 34.2 29.9 26.6 23.9 21.8 19.9 18.4 17.1 16.0 #5 3/4 183.5 91.8 61.2 45.9 36.7 30.6 26.2 22.9 20.4 18.4 16.7 15.3 14.1 13.1 12.2 #6 7/8 148.2 74.1 49.4 37.0 29.6 24.7 21.2 18.5 16.5 14.8 13.5 12.3 11.4 10.6 9.9 #7 1-1/8 71.0 35.5 23.7 17.7 14.2 11.8 10.1 8.9 7.9 7.1 6.5 5.9 5.5 5.1 4.7 #8 1-1/4 63.2 31.6 21.1 15.8 12.6 10.5 9.0 7.9 7.0 6.3 5.7 5.3 4.9 4.5 4.2 #9 1-3/8 65.9 33.0 22.0 16.5 13.2 11.0 9.4 8.2 7.3 6.6 6.0 5.5 5.1 4.7 4.4 #10 1-1/2 53.9 27.0 18.0 13.5 10.8 9.0 7.7 6.7 6.0 5.4 4.9 4.5 4.1 3.9 3.6 #11 1-3/4 33.0 16.5 11.0 8.2 6.6 5.5 4.7 4.1 3.7 3.3 3.0 2.7 2.5 2.4 2.2 * The number of anchoring installations is based upon calculations of hole volumes using ANSI tolerance carbide tipped drill bits, the nominal areas of the reinforcing bars and the stress areas of the threaded rods. These estimates do not account for waste. * Oversized holes acceptable but volume of adhesive will increase.

ESTIMATING TABLE

C6   18 Fluid Ounce Cartridge   Number of Anchoring Installations per Cartridge* Using Threaded Rod with C6 Adhesive in Solid Concrete ROD In. (mm) DRILL HOLE DIA. INCHES EMBEDMENT DEPTH IN INCHES (mm) 1 (25.4) 2 (50.8) 3 (76.2) 4 (101.6) 5 (127.0) 6 (152.4) 7 (177.8) 8 (203.2) 9 (228.6) 10 (254.0) 11 (279.4) 12 (304.8) 13 (330.2) 14 (355.6) 15 (381.0) 1/4(6.4) 5/16 587.3 293.7 195.8 146.8 117.5 97.9 83.9 73.4 65.3 58.7 53.4 48.9 45.2 42.0 39.2 3/8(9.5) 7/16 340.0 170.0 113.3 85.0 68.0 56.7 48.6 42.5 37.8 34.0 30.9 28.3 26.2 24.3 22.7 1/2 (12.7) 9/16 244.7 122.4 81.6 61.2 48.9 40.8 35.0 30.6 27.2 24.5 22.2 20.4 18.8 17.5 16.3 5/8(15.9) 3/4 125.2 62.6 41.7 31.3 25.0 20.9 17.9 15.7 13.9 12.5 11.4 10.4 9.6 8.9 8.3 3/4(19.1) 7/8 99.1 49.5 33.0 24.8 19.8 16.5 14.2 12.4 11.0 9.9 9.0 8.3 7.6 7.1 6.6 7/8(22.2) 1 82.0 41.0 27.4 20.5 16.4 13.7 11.7 10.3 9.1 8.2 7.5 6.8 6.3 5.9 5.5 1(25.4) 1-1/8 67.6 33.8 22.5 16.9 13.5 11.3 9.7 8.4 7.5 6.8 6.1 5.6 5.2 4.8 4.5 1-1/4(31.8) 1-3/8 51.2 25.6 17.0 12.8 10.2 8.5 7.3 6.4 5.7 5.1 4.6 4.3 3.9 3.7 3.4 * The number of anchoring installations is based upon calculations of hole volumes using ANSI tolerance carbide tipped drill bits, the nominal areas of the reinforcing bars and the stress areas of the threaded rods. These estimates do not account for waste. * Oversized holes acceptable but volume of adhesive will increase. EPCON C6 Fast Curing Epoxy Product Information and Advantages Suggested Specifications Applications, Features and Installation Instructions Ordering Information and Estimating Tables 18 oz. Performance Data (3 pages) : Watch Training Video : Approval and Listings