 |
Epoxy Adhesive
High Strength EPOXY ADHESIVE: USA Made, ARRA Certified
| 1. |
Two component resin and hardener, 100% solids (containing no solvents or VOC’s), non-sag paste, insensitive to moisture, grey in color, early working time and gel time appropriate for sever installation conditions, suitable for extreme temperature ranges, for all conditions or substrate materials. |
| 2. |
Meets NSF Standard 61, certified for use in conjunction with drinking water systems. |
| 3. |
Works in wet, damp, and submerged hole. |
| 4. |
Conforms to ASTM C881-02; Type I & IV; Grade 3; Class A, B, and C; with exceptions. |
| 5. |
Compressive strength, ASTM D695-02: 12,090 psi minimum. |
| 6. |
Heat deflection temperature: 139°F minimum. |
| 7. |
Extended Shelf life: Best if used within 2 years. |
| 8. |
Reliable performance in solid or hollow base materials. |
| 9. |
Oversized and/or diamond cored holes permitted. |
| 10. |
Suitable for Cold Base material installation using warmed cartridge. |
Epoxy Adhesive Packaging
| 1. |
Disposable, self-contained cartridge
system capable of dispensing both epoxy components in the proper
mixing ratio |
| 2. |
Epoxy components dispensed through
a static mixing nozzle that thoroughly mixes the material, and
places the epoxy at the base of the pre-drilled hole |
| 3. |
Cartridge markings: Include manufacturer's name, batch number and best-used-by date, mix ratio by volume, ANSI hazard classification, and appropriate ANSI handling precautions |
|
